The plate chain conveyor will encounter many problems in the application process, of which the slip of the plate chain conveyor is a very common problem, so how should we solve it? Tianjin Longye answers for you:

The plate chain conveyor uses rolling friction instead of sliding friction, so its operating resistance is very low, but this also increases the possibility of slipping. When starting, the initial tension is too small, the tension of the conveyor belt leaving the drum is not enough to cause the conveyor belt to slip, and the load of the conveyor belt is too large, exceeding the electrical capacity will slip, there are many reasons for the slip of the plate chain conveyor.

The solution:

1. The plate chain conveyor using a heavy hammer tensioning device can be solved by adding a counterweight when the plate chain conveyor slips, but too much should not be added to avoid the plate chain conveyor bearing unnecessary excessive tension and reducing its service life.

2. Adjust the tension stroke to increase the tension force, adjust the tension device to increase the initial tension.

3. Add some rosin powder on the roller to prevent slipping, but be careful not to add it by hand, and use blast equipment to blow into it to avoid personal accidents.

The above information is provided by pipe chain machine, conveyor, plate chain conveyor, pipe chain conveyor. If you want to know more, please click on the official website to query: http://www.tjly.cn/